Hot sale 99.95% high quality molybdenum bar
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,FCA,CPT|
|Min. Order:||10 Kilogram|
|Delivery Time:||10 Days|
|Place of Origin:||Shaanxi, Baoji|
Model No.: ASTM B386
Hot Sale 99.95% high quality molybdenum bar is the main products of our company. Hot sale 99.95% high quality molybdenum bar is widely used in industrial, eapecially used in single crystal furnace and vacuum furnace.
The material of Hot sale 99.95% high quality molybdenum bar belongs to refractory metals, and Hot sale 99.95% high quality molybdenum bar has the high melting point. so the feature of Hot sale 99.95% high quality molybdenum bar is high temperature resistance.
Pure hot molybdenum alloy bars for industry
Baoji Zhipu Non-Ferrous Metals Processing Co.,Ltd is one of the most famous China molybdenum bar manufacturers and suppliers, welcome to Wholesale cheap molybdenum bar products from our company and factory.
|Product Name||Hot sale 99.95% high quality molybdenum bar|
|Origin||China, Shannxi, Baoji|
Molybdenum rod has a high melting point, good thermal conductivity and low thermal expansion properties. At high temperature, can be anti-oxidation, high strength.
Molding, Sintering, Drape forging, Mechanical processing
Pure molybdenum bar: molybdenum content more than 99.95%.
High temperature molybdenum bar(Molybdenum lanthanum alloy bar): Lanthanum containing 0.4~1.2%, Molybdenum content is in addition to the impurity of allowance.
TZM molybdenum bar: Mo-0.5Ti-0.07~0.12Zr-0.01~0.04C.
Molybdenum bar is also divided into forging molybdenum bar and polished molybdenum bar, surface of forging molybdenum rods allow slight oxide film, hammer marks; Surface of polished molybdenum rods present metallic luster, no oxidation phenomenon; Two surface without defects, such as the layering, crack, burr and vertical crack, etc.
1. Sintering molybdenum bar surface is silver gray metallic luster
2. Forging molybdenum bar surface with a layer of oxide, the surface is black
3. Polished molybdenum bar surface is silver gray metallic luster
Method for removing surface oxide
1. Molybdenum product has the characteristics of easy oxidation. When removing heavy oxide, available strong acid (fluorine acid, nitric acid, hydrochloric acid, etc.).
2. Mild oxide use detergent to clean, with a soft cloth or a sponge to wipe, and then rinse with warm water. Wash of molybdenum products will lose metallic luster.
1. Used in the manufacture of electric vacuum device and electric light source parts.
2. Applicable to processing of ion implanted parts.
3. Used for high temperature heating element and high temperature structure parts.
4. Used as electrode.
Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd.
Baoji Zhipu non-ferrous metals processing co., ltd was established in 2003 and specialized in deep processing of refractory metals field. In 13 years` time, we have been focusing on tungsten, molybdenum and tantalum finish machining parts in vacuum application industry, especially on vacuum furnace, atmosphere furnace and high temperature furnace. We have accumulated quite experience and technology in technology research and development, furnace transformation, vacuum furnace structure technical exchange and refractory metals'deep processing technological exploration and have been to main supplier of vacuum furnace material and heating room. Now, Zhipu Company is awarded to high-tech enterprise, Shaanxi well-known trademark enterprise and is authorized by the world third party company---- TUV Rhineland Germany. So far, our total assets have 93 million Yuan and 117 employees, among of them, 8 senior engineering and technical employees, 36 intermediate technical employees and more than 63% employees above college education degree.
In recent years, according to change and demand of new market, company have cooperated with domestic university and research institute and established technology research and development center, aiming at in research of photovoltaic equipment, ynthetic sapphire equipment and refractory metals` furnaceparts.Our products have four series branch: tungsten, molybdenum and tantalum parts in all kinds of high temperature furnace; tungsten wire rope and other series products for pulling method of all kinds of semiconductor crystal growth; tungsten, molybdenum, tantalum and niobium refractory metals` plates, bars, wires, tubes; various diaphragms and electrodes. Now, we have 20 patents and some of technologies and products are filled of domestic blank.
1. Tungsten, molybdenum and tantalum parts and heating room series products in all kinds of high temperature furnace;
2. Tungsten, molybdenum products in crystal furnace of PV industry;
3. Various single crystal furnaces thermal field tungsten and molybdenum products in sapphire industry;
4. Diaphragms and electrodes products in various instruments.
- Company Name: Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd.
- Representative: ZhiChun Fu
- Product/Service: Tungsten Products , Molybdenum Products , Tantalum Products , Niobium Products , Tungsten Wire Rope , Molybdenum Plate
- Capital (Million US $): 12000000
- Year Established: 2003
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 1% - 10%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 4
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 10,000-30,000 square meters
- Factory Location: Chencang Technology and Industry Zone, Baoji, Shaanxi, China
- Contact Person: Mr. zhichun Fu
- Tel: 86-0917-6268608
Premium Related Products